Jeep Wrangler: Automatic Climate Control Descriptions And Functions / Front Defrost Button
Press and release this button on
the
touchscreen, or push and release the
button on the faceplate, to change
the current airflow setting to Defrost
mode. The Front Defrost indicator illuminates
when Front Defrost is on. Air comes from the
windshield and side window demist outlets.
When the defrost button is selected, the blower
level may increase. Use Defrost mode with
maximum temperature settings for best
windshield and side window defrosting and defogging. When toggling the front
defrost
mode button, the climate system returns to the
previous setting.
Set your desired temperature and
press AUTO. AUTO will achieve and
maintain your desired temperature by
automatically adjusting the blower
speed and air distribution...
Press and release the Rear
Defrost
button on the touchscreen, or push
and release the button on the
faceplate, to turn on the rear window
defroster and the heated outside mirrors (if
equipped)...
Other information:
The seat belts in the passenger seating
positions are equipped with a Switchable
Automatic Locking Retractor (ALR) which is
used to secure a child restraint system. The
figure below illustrates the locking feature for
each seating position.
ALR — Switchable Automatic Locking Retractor Locations
(Two-Door Models)
ALR — Switchable Automatic Locking Retractor Locations
(Four-Door Models)
If the passenger seating position is equipped
with an ALR and is being used for normal usage,
only pull the seat belt webbing out far enough to
comfortably wrap around the occupant’s
mid-section so as to not activate the ALR...
Fold both sun visors forward against the
windshield.
Release the header latches from the
crossbar by pulling the handle downward.
Make sure the hook is disengaged from its
receiver.
Step Two
From both the left and right sides, lift up on
the #1 Bow of the soft top to start the
operation...