Jeep Wrangler: Red Warning Lights / Vehicle Security Warning Light — If Equipped
This light will flash at a fast
rate for
approximately 15 seconds when the
Vehicle Security system is arming,
and then will flash slowly until the
vehicle is disarmed.
This warning light will
illuminate to
warn of a high transmission fluid
temperature. This may occur with
strenuous usage such as trailer
towing. If this light turns on, stop the vehicle and run the engine at idle or
slightly faster, with the
transmission in PARK (P) or NEUTRAL (N), until
the light turns off...
Other information:
CERTIFICATION LABEL
As required by National Highway Traffic Safety
Administration regulations, your vehicle has a
certification label affixed to the driver's side
door or pillar.
This label contains the month and year of
manufacture, Gross Vehicle Weight Rating
(GVWR), Gross Axle Weight Rating (GAWR) front
and rear, and Vehicle Identification Number
(VIN)...
Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been removed
and reinstalled on the vehicle, the lug nuts/
bolts should be torqued using a properly
calibrated torque wrench using a six sided (hex)
deep wall socket...