Jeep Wrangler: WARNING LIGHTS AND MESSAGES / Blue Indicator Lights
This indicator light will
illuminate to
indicate that the high beam
headlights are on. With the low beams
activated, push the multifunction
lever forward (toward the front of the vehicle) to
turn on the high beams...
Other information:
WARNING!
Do not attempt to inspect an accessory
drive belt with vehicle running.
When working near the radiator cooling fan,
disconnect the fan motor lead. The fan is
temperature controlled and can start at any
time regardless of ignition mode...
From the fully lowered
position, remove straps if
previously secured.CAUTION!
Failure to follow the next steps could result in
damage to the Soft Top or vehicle.
While pushing down on the rear of the top,
slide the lock lever on the left and right side
lift assist mechanisms to the “unlock”
position...