Jeep Wrangler: SERVICING AND MAINTENANCE / BODYWORK

STORING THE VEHICLE

WARNING! Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades...

Protection From Atmospheric Agents

Vehicle body care requirements vary according to geographic locations and usage. Chemicals that make roads passable in snow and ice and those that are sprayed on trees and road surfaces during other seasons are highly corrosive to the metal in your vehicle...

Other information:

Jeep Wrangler 2018-2026 Owners Manual: Axle Lock (Tru-Lok) Front And Rear — If Equipped


The AXLE LOCK switch is located on the instrument panel (to the right of the steering column). Axle Lock Switch Panel This feature will only activate when the following conditions are met: Ignition in RUN position, vehicle in 4WD Low. Vehicle speed should be 10 mph (16 km/h) or less...

Jeep Wrangler 2018-2026 Owners Manual: Possible Reasons The Engine Does Not Autostop


Prior to engine shut down, the system will check many safety and comfort conditions to see if they are fulfilled. Situations when the engine will not stop include (but not limited to): Driver’s seat belt is not buckled. Outside temperature is less than 10°F (–12°C) or greater than 109°F (43°C)...

Categories

Manual Front Seat Forward/Rearward Adjustment

The seat can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar located under the seat cushion and move the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.

Jeep Wrangler. Manual Front Seat Forward/Rearward Adjustment

Adjustment Bar Location

read more

 
Copyright © 2026 www.jewrangler.com