Jeep Wrangler: Android Auto™ And Apple CarPlay® Tips And Tricks / Multiple Devices Connecting To The Uconnect System — If Equipped
It is possible to have multiple devices connected to the Uconnect system. For example, if using Android Auto™/Apple CarPlay®, the connected device will be used to place hands-free phone calls or send hands-free text messages. However, another device can also be paired to the Uconnect system, via Bluetooth®, as an audio source, so the passenger can stream music.
NOTE:
Apple CarPlay® and Android Auto™ can only be launched from the front and center console USB ports.
Android Auto™ And Apple CarPlay® Automatic Bluetooth® Pairing
After connecting to Android Auto™ or Apple
CarPlay® for the first time and undergoing the
setup procedure, the smartphone pairs to the Uconnect system via Bluetooth®
without any
setup required every time it is within range, if
Bluetooth® is turned on...
Other information:
Jeep Wrangler 2018-2026 Owners Manual: A/C Button
Push the A/C button to engage the Air Conditioning (A/C). The A/C indicator illuminates when A/C is on. NOTE: For Manual Climate Controls, if the system is in Mix, Floor or Defrost Mode, the A/C can be turned off, but the A/C system shall remain active to prevent fogging of the windows...
Jeep Wrangler 2018-2026 Owners Manual: Axle Lock (Tru-Lok) Front And Rear — If Equipped
The AXLE LOCK switch is located on the instrument panel (to the right of the steering column). Axle Lock Switch Panel This feature will only activate when the following conditions are met: Ignition in RUN position, vehicle in 4WD Low. Vehicle speed should be 10 mph (16 km/h) or less...
Categories
- Manuals Home
- Jeep Wrangler Owners Manual
- Jeep Wrangler Service Manual
- Automatic High Beam Headlamp Control — If Equipped, Flash-To-Pass
- SiriusXM® Satellite Radio Mode — If Equipped
- WARNING LIGHTS AND MESSAGES
- New on site
- Most important about car
Manual Front Seat Forward/Rearward Adjustment
The seat can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar located under the seat cushion and move the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
Adjustment Bar Location
