Jeep Wrangler 2018-2024 Owners Manual / TECHNICAL SPECIFICATIONS / FUEL REQUIREMENTS — GASOLINE ENGINE / Reformulated Gasoline. Materials Added To Fuel. Gasoline/Oxygenate Blends

Jeep Wrangler: FUEL REQUIREMENTS — GASOLINE ENGINE / Reformulated Gasoline. Materials Added To Fuel. Gasoline/Oxygenate Blends

Reformulated Gasoline

Many areas of the country require the use of cleaner burning gasoline referred to as “reformulated gasoline”. Reformulated gasoline contains oxygenates and are specifically blended to reduce vehicle emissions and improve air quality.

The use of reformulated gasoline is recommended. Properly blended reformulated gasoline will provide improved performance and durability of engine and fuel system components.

Materials Added To Fuel

Besides using unleaded gasoline with the proper octane rating, gasolines that contain detergents, corrosion and stability additives are recommended. Using gasolines that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle performance.

Jeep Wrangler. Reformulated Gasoline. Materials Added To Fuel. Gasoline/Oxygenate Blends Designated TOP TIER Detergent Gasoline contains a higher level of detergents to further aide in minimizing engine and fuel system deposits. When available, the usage of TOP TIER Detergent gasoline is recommended. Visit www.toptiergas.com for a list of TOP TIER Detergent Gasoline Retailers.

Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and varnish removal may contain active solvents or similar ingredients. These can harm fuel system gasket and diaphragm materials.

Gasoline/Oxygenate Blends

Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol.

CAUTION!

DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).

Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void or not be covered under New Vehicle Limited Warranty.

    2.0L Engine and 3.6L Engine

    2.0L Engine This engine is designed to meet all emission requirements, and provide satisfactory fuel economy and performance, when using high-quality unleaded “regular” gasoline having an octane rating of 87, as specified by the (R+M)/ 2 method...

    Do Not Use E-85 In Non-Flex Fuel Vehicles

    Non-Flex Fuel Vehicles (FFV) are compatible with gasoline containing up to 15% ethanol (E-15). Use of gasoline with higher ethanol content may void the New Vehicle Limited Warranty...

    Other information:

    Jeep Wrangler 2018-2024 Owners Manual: Normal Starting


    Observe the instrument cluster lights when starting the engine. NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Always apply the parking brake. Press and hold the brake pedal while pushing the ENGINE START/STOP button once...

    Jeep Wrangler 2018-2024 Owners Manual: Turning FCW On Or Off


    The FCW button is located in the Uconnect display in the control settings. To turn the FCW system on, press the forward collision button once. To turn the FCW system off, press the forward collision button once. NOTE: When the FCW is “on”, this allows the system to warn the driver of a possible collision with the vehicle in front...

    Categories

    Automatic Headlights — If Equipped, Lights-On Reminder

    Automatic Headlights

    This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch clockwise to the last detent for automatic headlight operation. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition into the OFF position. To turn the automatic system off, move the headlight switch out of the AUTO position.

    read more

     
    Copyright © 2024 www.jewrangler.com