Jeep Wrangler: TOWING A DISABLED VEHICLE / Without The Key Fob
Special care must be taken when the vehicle is
towed with the ignition in the OFF mode. The
only approved method of towing without the key
fob is with a flatbed truck. Proper towing
equipment is necessary to prevent damage to
the vehicle.
FCA US LLC recommends towing with all wheels
OFF the ground. Acceptable methods are to tow
the vehicle on a flatbed or with one end of the
vehicle raised and the opposite end on a towing
dolly...
If your vehicle is equipped with tow hooks, they
are mounted in the front and the rear fascia/bumpers.
Front Tow Hooks
Rear Tow Hook
NOTE:
For off-road recovery, it is recommended to use
both of the front tow hooks to minimize the risk
of damage to the vehicle...
Other information:
This warning light indicates
when the
driver or passenger seat belt is
unbuckled. When the ignition is first
placed in the ON/RUN or ACC/ON/
RUN position and if the driver’s seat belt is
unbuckled, a chime will sound and the light will
turn on...
Carefully place the front door rail in the
rubber seal at the top of the windshield,
and line up the holes for the Torx head
screws (two for each door).
Swing the frame bracket around the side of
the rail, and insert the screws from
underneath...