Jeep Wrangler: Forward Collision Warning (FCW) With Mitigation — If Equipped / Service FCW Warning

FCW Limited Warning

If the instrument cluster displays “ACC/FCW Limited Functionality” or “ACC/FCW Limited Functionality Clean Front Windshield” momentarily, there may be a condition that limits FCW functionality...

Tire Pressure Monitoring System (TPMS)

The Tire Pressure Monitoring System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure. NOTE: The alert warning on the cluster will stay on until the tire is inflated to the placard pressure...

Other information:

Jeep Wrangler 2018-2026 Owners Manual: Axle Lock (Tru-Lok) Rear Only — If Equipped

The rear axle may be locked in 4WD High if the proper conditions are met. WARNING! This mode is intended for off-highway or off-road use only and should not be used on any public roadways. The AXLE LOCK switch is located on the instrument panel (to the right of the steering column)...

Jeep Wrangler 2018-2026 Owners Manual: Auxiliary Switches — If Equipped

Four auxiliary switches located in the lower switch bank of the instrument panel can be used to power various electrical devices. You have the ability to configure the functionality of the auxiliary switches via the Uconnect Settings. All switches can be configured as follows: Switch type operation: Latching or Momentary Power source: Battery or Ignition Ability to hold last state across key cycles: On or Off Auxiliary Switches NOTE: Holding last state conditions are met when switch type is set to latching and power source is set to ignition...