Jeep Wrangler 2018-2026 Owners Manual / GETTING TO KNOW YOUR INSTRUMENT PANEL / WARNING LIGHTS AND MESSAGES / Green Indicator Lights / Stop/Start Active Indicator Light — If Equipped

Jeep Wrangler: Green Indicator Lights / Stop/Start Active Indicator Light — If Equipped

Jeep Wrangler. Stop/Start Active Indicator Light — If Equipped This indicator light will illuminate when the Stop/Start function is in “Autostop” mode.

Park/Headlight On Indicator Light

Turn Signal Indicator Lights

When the left or right turn signal is activated, the turn signal indicator will flash independently and the corresponding exterior turn signal lamps will flash...

Other information:

Jeep Wrangler 2018-2026 Owners Manual: Engine Check/Malfunction Indicator Warning Light (MIL)

The MIL is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. This warning light will illuminate when the ignition is in the ON/RUN position before engine start. If the bulb does not come on when turning the ignition switch from OFF to ON/RUN, have the condition checked promptly...

Jeep Wrangler 2018-2026 Owners Manual: Draining Fuel/Water Separator Filter — Diesel Engine

The fuel/water separator housing is located inside the left frame rail in front of the fuel tank. The best access to this water drain valve is from under the vehicle. CAUTION! Do not drain the fuel/water separator filter when the engine is running...

Automatic Headlights — If Equipped, Lights-On Reminder

Automatic Headlights

This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch clockwise to the last detent for automatic headlight operation. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition into the OFF position. To turn the automatic system off, move the headlight switch out of the AUTO position.