Jeep Wrangler: Automatic Climate Control Descriptions And Functions / Floor Mode
Air comes from the floor outlets.
A
slight amount of air is directed
through the defrost and side window
demister outlets.
Air comes from the instrument
panel
outlets and floor outlets. A slight
amount of air is directed through the
defrost and side window demister
outlets...
Air is directed through the
floor,
defrost, and side window demister
outlets. This setting works best in cold
or snowy conditions that require extra
heat to the windshield...
Other information:
Remove both front panels.
Open both front doors.
Using the provided #50 Torx head driver
and ratchet, remove the two Torx head
screws that secure the hard top at the
B-pillar (near the top of the front doors).
Step Three
Remove the six Torx head screws that
secure the hard top to the vehicle (along the
interior bodyside — three screws on each
side) using the #50 Torx head driver...
Remove the side grommet (one left and
one right).
Pull the carpet out starting on the top
flange, then all around the perimeter and
open the carpet split around the seat belt
attachment.
Inside Sidewall
Top Flange
Grommet
Side Carpet
When reinstalling carpet please perform
these steps in reverse order making sure
that the carpet is tucked under the scuffs,
B-pillar, console, and refasten grommets...