Jeep Wrangler 2018-2025 Owners Manual / MULTIMEDIA / CONNECTED VEHICLE SERVICES — IF EQUIPPED / Getting Started With Connected Vehicle Services
Jeep Wrangler: CONNECTED VEHICLE SERVICES — IF EQUIPPED / Getting Started With Connected Vehicle Services
Download The Uconnect App
Once you have activated your services, you’re
only a few steps away from using connected
services.
Uconnect Mobile App
Settings
Vehicle Info
Location And Send & Go
Remote Commands
Download the Uconnect app to your mobile
device...
Other information:
Jeep Wrangler 2018-2025 Owners Manual: Power Inverter — If Equipped
There is a 115 Volt, 150 Watt inverter outlet located on the back of the center console to convert DC current to AC current. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts. Certain video game consoles exceed this power limit, as will most power tools...
Jeep Wrangler 2018-2025 Owners Manual: Axle Lock (Tru-Lok) Front And Rear — If Equipped
The AXLE LOCK switch is located on the instrument panel (to the right of the steering column). Axle Lock Switch Panel This feature will only activate when the following conditions are met: Ignition in RUN position, vehicle in 4WD Low. Vehicle speed should be 10 mph (16 km/h) or less...
Categories
- Manuals Home
- Jeep Wrangler Owners Manual
- Jeep Wrangler Service Manual
- Manual Front Seat Recline Adjustment
- Turning FCW On Or Off
- 2.0L Engine and 3.6L Engine
- New on site
- Most important about car
Manual Front Seat Forward/Rearward Adjustment
The seat can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar located under the seat cushion and move the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
Adjustment Bar Location
Copyright © 2025 www.jewrangler.com