Jeep Wrangler: Safety And General Information / Safety Guidelines

WARNING!

ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume all risks related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious injury or death.

Please read this manual carefully before using the system. It contains instructions on how to use the system in a safe and effective manner.

Do NOT attach any object to the touchscreen. Doing so can result in damage to the touchscreen.

Please read and follow these safety precautions. Failure to do so may result in injury or property damage.

  • Glance at the screen only when safe to do so. If prolonged viewing of the screen is required, park in a safe location and set the parking brake.
  • Stop use immediately if a problem occurs. Failure to do so may cause injury or damage to the product. See an authorized dealer for repair.
  • Ensure the volume level of the system is set to a level that still allows you to hear outside traffic and emergency vehicles.

    Safety And General Information

    ..

    Safe Usage Of The Uconnect System

    The Uconnect system is a sophisticated electronic device. Do not let young children use the system. Permanent hearing loss may occur if you play your music or sound system at loud volumes...

    Other information:

    Jeep Wrangler 2018-2026 Owners Manual: Removing The Rear Seat


    Push down on the release bar on each side, and pull the seat out and away from the lower bracket. Release Bar Location Remove the seat from the vehicle. To reinstall the rear seat, just reverse these steps. NOTE: Do not drive the vehicle without reattaching the rear seat latches...

    Jeep Wrangler 2018-2026 Owners Manual: Selec-Speed Control (SSC) — If Equipped


    SSC is intended for off-road driving in 4WD Low only. SSC maintains vehicle speed by actively controlling engine torque and brakes. SSC has three states: Off (feature is not enabled and will not activate) Enabled (feature is enabled and ready but activation conditions are not met, or driver is actively overriding with brake or throttle application) Active (feature is enabled and actively controlling vehicle speed) Enabling SSC SSC is enabled by pushing the SSC switch, but the following conditions must also be met to enable SSC: The driveline is in 4WD Low...

    Categories

    Bi-Level Mode

    Jeep Wrangler. Bi-Level Mode Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets.

    NOTE:

    Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets.

    read more

     
    Copyright © 2026 www.jewrangler.com