Jeep Wrangler: Using SiriusXM Guardian™ / Using A Remote Command Through Your Owner’s Site

  1. Log on to your Owner’s Site using the username and password you used when activating your SiriusXM Guardian™ services in your vehicle.

    NOTE:

    If you forgot your username or password, links are provided on the website to help you retrieve them.

  2. If you have more than one vehicle registered into your Owner’s Site, select the vehicle you want to send the command to by clicking on its image along the top.
  3. On your dashboard, you will see remote commands. Press the desired icon to activate that feature.
  4. You will then be asked to enter your SiriusXM Guardian™ Security PIN (this is the same four-digit code established when you activated your SiriusXM Guardian™ system). Please enter your SiriusXM Guardian™ Security PIN.
  5. A message will appear on the screen to let you know if the command was received by your vehicle.

Contacting SiriusXM Guardian™ Customer Care (for example, in case of an accidental lock-out):

  1. Contact SiriusXM Guardian™ Customer Care if you are unable to lock your vehicle through the Uconnect App or your key fob.
  2. For security purposes, the SiriusXM Guardian™ Customer Care agent will verify your identity by asking for your four-digit SiriusXM Guardian™ Security PIN.
  3. After providing your SiriusXM Guardian™ Security PIN, you can ask them to perform a remote command.

NOTE:

Anyone with access to your PIN may request Remote Door Lock/Unlock. It is your responsibility to protect your PIN appropriately.

    Using A Remote Command Through Your Mobile Device And The Uconnect App

    Press the desired Remote Command icon on your mobile device. A pop-up screen will appear asking for your SiriusXM Guardian™ Security PIN (this is the same four-digit code established when you activated your SiriusXM Guardian™ system)...

    Remote Door Lock/Unlock

    Description The Remote Door Lock/Unlock feature provides you the ability to lock or unlock the door on your vehicle without the keys and from virtually any distance...

    Other information:

    Jeep Wrangler 2018-2025 Owners Manual: Run Flat Tires — If Equipped


    Run Flat tires allow you the capability to drive 50 miles (80 km) at 50 mph (80 km/h) after a rapid loss of inflation pressure. This rapid loss of inflation is referred to as the Run Flat mode. A Run Flat mode occurs when the tire inflation pressure is of/or below 14 psi (96 kPa)...

    Jeep Wrangler 2018-2025 Owners Manual: Display Warnings And Maintenance


    “Wipe Front Radar Sensor In Front Of Vehicle” Warning The “ACC/FCW Unavailable Wipe Front Radar Sensor” warning will display and a chime will sound when conditions temporarily limit system performance. This most often occurs at times of poor visibility, such as in snow or heavy rain...

    Categories

    Basic Voice Commands

    The basic Voice Commands below can be given at any point while using your Uconnect system. Push the VR button on the steering wheel. After the beep, say:

    “Cancel” to stop a current voice session. “Help” to hear a list of suggested Voice Commands. “Repeat” to listen to the system prompts again.

    read more

     
    Copyright © 2025 www.jewrangler.com